IDCB45.5 DRIFT CLIP 3.5x5.5x4 12GA 25PAK W/SCREWS

$369.62

The IDCB drift-clip connector is used to secure bypass stud framing to the edge of a slab. The connector will accommodate 1" of lateral drift in each direction and 1" of upward and downward vertical deflection. Tested load values are provided for anchorage to a steel edge angle using #12 x 1 1/4" Strong-Drive® XL Large-Head Metal screws.

  • Material: 97 mil (12 ga.) 
  • Finish: Galvanized (G90) 
  • 25 count per box 
  • Screws included 

Key Features: 

  • Horizontal embossments and corner gussets optimize performance in the F2 load direction
  • Precision-manufactured shouldered screws provided with the IDCB connector are designed to prevent overdriving and to ensure that the clip functions properly
  • Simpson Strong-Tie "No-Equal" stamps mark the center of the slots to help ensure correct shouldered screw and anchor placement

Installation: 

  • Use the specified type and number of fasteners and anchors.
  • In the vertical slots, use the specified number of #14 shouldered screws (included) for attachment to the stud. Install screws to align with the "No-Equal" stamp.
  • For attachment to a minimum 3/16"- and maximum 1/2"-thick steel edge angle, use Simpson Strong-Tie® Strong-Drive XL Large-Head Metal screws (XLQ114B1224). Use one screw centered in each horizontal slot. Install screws to align with the "No-Equal" stamp and back out 1/2 turn.
  • For fastener installation into steel backed by concrete, predrilling of both the steel and the concrete may be required. For predrilling, use a maximum 3/16"-diameter drill bit.

Tier Pricing: 

simpson strong tie drift clip

More from this collection

  • Visa
  • MasterCard
  • Amex
  • Discover
  • PayPal